I created these super cute free Layered Bee Mine SVG Files with Valentines in mind. However they are more that that as are also perfect for family crafts and mother/father and child scrapbooking layouts.
Additionally they make beautiful proposal layouts and home interior projects such as cushions and framed artwork.
Check Out Our Free Valentines SVG Files
This post may contain affiliate links. Which means I may receive a small commission if you click a link and purchase something that I have recommended at no extra cost to yourself. As an amazon, Cricut and Glowforge associate, I earn from qualifying purchases.
What You Will Find Here
Free Layered Bee Mine SVG
Making Your Layered Bee Mine SVG /PNG On Cricut
Upload your Layered Bee Mine SVG G files to Cricut Design Space, follow these instructions if you need help doing this. Firstly you will need to ensure all layers line up correctly, they should, however if they don’t, select your layer and click on the padlock on the top bar to adjust.
Once you are happy, colour all the layers of your Layered Bee Mine SVG using the pictures on this page as a guide. The Colours I used are….
- 1. White Glitter
- 2. Lemon Card
- 3. Peach Card
- 4. Lilac Card
Cutting Your Layered Layered Bee Mine File On Cricut
How To Build Your Bee Mine SVG Layered File
Firstly start by making sure they all line up and every layer is the correct way round, then flip all of the layers over.
Build this file from the back upwards, start by putting sticky pads onto the back of the peach layer and attach too the top off the lilac layer. If the pads are too big just cut them down.
Then put sticky pads onto the back of the lemon layer and attach to the top of the peach layer. Lastly put glue dots onto the back of the white glitter layer and attach to the top of the lemon layer.
How To Get Your Free Layered Bee Mine SVG /PNG Files
Click here or the the image below to get your free downloadable Bee Mine layered SVG/png files from our members shop and follow these instructions to add to Cricut Design Space. Don’t forget to turn off any pop up blockers, and follow the instructions to sign in and download in the shop. Note if you are using Glowforge you need SVG files to cut the image out of wood or acrylic. Or Png or SVG to engrave.
If You’re Having Problems?
Check out my trouble shooting page, hopefully it will answer any questions you may have.
More Tips And Advice For Crafters
- Cricut Design Space Guide
- How To Slice And Weld In Cricut Design Space
- How to upload to Cricut Design Space
- Using Iron On Vinyl
- Where Else To Get Free SVG Files
- Check Out What I Thought Of The xTool M1
- Review of the HTVRont Autopress