Free Printable Pink Baby Stork Alphabet Letters & Numbers

This adorable free Printable Pink Baby Stork Alphabet Letters & Numbers is perfect for print and cut projects with Cricut, Silhouette and xTool, offering so many posibilites for creating pink themed new baby, christening and baby shower projects, such as custom cards, banners, cake toppers and gifts.

Created in collaboration with my amazing assistant Alisha, we are super proud of the delicate stork and pretty accents that make this the perfect alphabet for print then cut and sublimation projects. Keep your eyes peeled for our blue stork alphabet next week. Also see our SVG Stork Alphabet and printable pink stork file in our shop and our free Blue Printable Stork Alphabet.

This post may contain affiliate links. Which means I may receive a small commission if you click a link and purchase something that I have recommended at no extra cost to yourself. As an amazon, Cricut and Glowforge associate, I earn from qualifying purchases.

How To Make A Baby Shower Cake Topper With My Printable Pink Stork Alphabet And Numbers

How To Upload Your Printable Pink Stork Alphabet And Numbers To Cricut Design Space.

I will use our flamingo letters but the principle is the same. Start by clicking upload in the bottom left hand corner of Cricut Design Space, a box will appear where you can select browse files. Now find your download file and choose the PNG folder, these are the files you will need for design space.

Select the printable Pink Stork PNG Alphabet letters or numbers you require one at a time. When you choose a letter you will see the box below. Simply select complex and click continue in the bottom right corner.

Next you’ll be taken to a screen where you can remove the back off the file. However I have done this for you, just click continue in the bottom left corner. Now you will get the choice to save your printable alphabet as a cut file or a print then cut file. You must save as print then cut.

Now bulk select the letters and numbers for your Print and Cut project to pull into Cricut Design Space.

How Build A Baby Shower Stork Cake Topper In Cricut Design Space

Firstly choose all the elements you want to add to your cake topper and size the main number or letters. Note, you will build the rest of the cake topper elements arounds this. Next choose any elements, I chose 2 stars to layer on top, before sizing them over the top to get the size right. I layered the stork letters and stars to give a 3d effect.

Now add an offset to the letters and stars, this will automatically set as a print and cut layer, so make sure you change it to a cut layer. Therefore you will finish with a combination of print and cut and cut layers.

Next add you stars into position. Once added select all and add an offset over the whole design. However also remember to change the offset layer to cut. Keep building the cake topper one offset layer at a time until you are happy. It really is an anything goes kinda project, be as flamboyant as you want.

How To Print Your Print And Cut Cake Topper On Your Cricut

Once you are happy with your choice and sizes, click on the corner and drag the attached images until they are the correct size to print then cut. I find selecting all and grouping works, although you just need to ungroup before sending the project to make.

What Is The Maximum Size For Cricut Print And Cut?

They need to be 6.75.x 9.25 or less to fit within the cut sensor marks and use the print and cut feature.

Send Your Pink Stork Baby Shower Cake Topper To Print And Cut

Now click make it, this will take you to the print preview page, if at all possible select use printer system dialog you can then choose fine print settings through your printer. I find if you go through design space the print quality is not always as good. If system dialog doesn’t pop up simply reduce design space and it will appear behind. You can now choose fine print quality.

Also ensure you feed your card the correct way into the printer and press print. When you unload your printer avoid touching the black guide line around the edge of the printed imaged as I find this smudges easily.

Once printed, gently put the card on your cutting mat, I don’t roll it with a brayer as I usually would, simply gently press around the edge. But ensure the mat is sticky and the edges are well stuck down.

Cut Your Printable Pink Stork Alphabet Cake Topper With Your Cricut

You will be taken to the cut screen, here you choose the correct materials for the project.  Now press go on your Cricut. However remember you’re working with a combination of print and cut and card stock.

Build You Stork Cake Topper

Now simply build up the layers using the sticky pads, I find it works to use the image in design space as a guide. I started by building from the front and working backwards. Use glue to attach the straw to the back of the cake topper.

If You Don’t Have Cricut ?

You can upload my Printable Pink Stork Alphabet to Canva, this is a great programme for making posters and cards, or indeed Word or Pages. I have provided a set of Jpg files for use in these programs if you would prefer your Printable Space Alphabet to have the white background on.

If You Want To Use These Free Printable Pink Stork PNG Alphabet Letters And Numbers?

Simply click here or on the image below to get my free Cricut Printable Pink Stork Alphabet cut file downloads from our shop. Here’s how you upload the files to Cricut Design Space.

If You’re Having Problems?

Check out my trouble shooting page, hopefully it will answer any questions you may have.

Tips And Advice For Using Cricut

• Cricut Design Space Guide
• How to upload to Cricut Design Space
• How To Make Print And Cut Stickers In Cricut Design Space
• Where Else To Get Free SVG Files

Also please do pop over to Instagram, or TikTok and give me a follow and if you make a project please do tag me! I love seeing everyone else’s makes and chatting crafting. I could do that all day! This is also where I share all my projects in progress.