Free Layered Wizard Halloween Gnome SVG

If you have been around here for a while you will know I love Gnomes, I know in theory they aren’t a thing for every season. But why not? If we want a Halloween Gnome we can have one right? If it makes you smile then it’s allowed. So here is our Free Layered Wizard Halloween Gnome SVG.

Not only is he a super cute fella, but he’s perfect for diy Halloween decor and wizard themed parties.

This post may contain affiliate links. Which means I may receive a small commission if you click a link and purchase something that I have recommended at no extra cost to yourself. As an Amazon, Cricut and Glowforge associate, I earn from qualifying purchases.

What You Will Need For My Free Wizard Halloween Gnome SVG

• Cricut Maker,
• Weeding Tools 
• Brayer
• Card Stock, red, gold glitter, white glitter, black glitter, purple (I wish I had used glitter for this layer too!)
• Glue, I use Cosmic Shimmer Acrylic Glue
• Nuvo Drops I have used morning dew, but this link is for glitter drops as I think that would work better.

Making Your Wizard Halloween Gnome SVG/PNG On Cricut

Upload your Wizard Halloween Gnome SVG files to Cricut Design Space, follow these instructions if you need help doing this. Firstly you will need to ensure all layers line up correctly, they should, however if they don’t, click on the padlock on the corner of the Gnome files to adjust.

Once you are happy, colour all the layers of your Halloween Gnome using the pictures on this page as a guide. The Colours I used are….

• 1. Purple for the top layer ( I wish I had used glitter)
• 2. Black glitter for the second layer.
• 3. White glitter for layer 3.
• 4. Gold glitter for layer 4
• 5. Red for back layer.

Cutting Your Wizard Halloween Gnome SVG On Cricut

When you send your Wizard Halloween Gnome SVG/PNG files to your Cricut to cut, ensure you use your brayer to roll the paper, vinyl or card to adhere to the mat. Note that movement will affect the cut. I use a green cutting mat and reverse weed as I feel projects cut better on the green mat.

How To Build Your Wizard Halloween Gnome SVG Layered File

Firstly start by making sure all the layers line up and every layer is the correct way round, then flip all of the layers over.

Next, turn the back red layer over so it’s facing the correct way. Now put glue dots to the back over the gold layer and attach to the top of the red. Next, repeat with the white layer and attach to the top of the gold layer. Repeat this with the black, then lastly the purple layer. Now finish off by adding Nuvo dots to the buckle of the wizards hat.

How To Get Your Free Wizard Halloween Gnome SVG/PNG Files

Click here of the the image below to get your free downloadable Halloween Gnome SVG/png files and follow these instructions to add to Cricut Design Space. Don’t forget to turn off any pop up blockers. Note if you are using Glowforge you need SVG files to cut the image out of wood or acrylic. Or Png or SVG to engrave.

If You’re Having Problems?

Check out my trouble shooting page, hopefully it will answer any questions you may have.

Tips And Advice For Using Your Download For Cricut

• Cricut Design Space Guide
• How To Slice And Weld In Cricut Design Space
• How to upload to Cricut Design Space
• Using Iron On Vinyl
• Where Else To Get Free SVG Files

Also please do pop over to Instagram, or Tik Tok and give me a follow and if you make a project tag me! I love seeing everyone else’s makes and chatting crafting. I could do that all day.