Layered Heart Union Jack SVG/PNG For Jubilee Crafts For Cricut And Glowforge

As we new nearing our Queens Jubilee Celebrations, I decided this was a good point to start creating the odd Jubilee craft project. I mean this is a huge deal, our wonderful Queen is celebration her Platinum Jubilee, 70 years of service. So a few decorations are most definitely in order. To kick off the Jubilee crafts my Layered Heart Union Jack SVG/PNG is perfect for Jubilee Crafts and banners.

I have to say this Jubilee File had me scratching my head a little. I originally created it on one layer for a jubilee alphabet or to cut on Glowforge. But quickly realised I needed layered version, which wasn’t as easy as I had initially thought.

This post may contain affiliate links. Which means I may receive a small commission if you click a link and purchase something that I have recommended at no extra cost to yourself. As an amazon, Cricut and Glowforge associate, I earn from qualifying purchases.

Project Ideas For My Layered Heart Union Jack SVG/PNG

• Jubilee Cards
• Royal Jubilee Cake Toppers
• Wooden Art With Glowforge
• Use Pegs And String For Hanging Jubilee Banners
• Iron On Vinyl Hoops
• Hanging Wooden Signs With Glowforge
• Scrapbooking Pages

What You Will Need For My Layered Heart Union Jack SVG

• Cricut Maker, to cut out of Cardstock or Glitter Card
• Weeding Tools 
• Brayer
• Cricut Sparkle Paper
• White Card Stock
• Red Card Stock

Making Your Layered Heart Union Jack SVG/PNG On Cricut

Upload your files to Cricut Design Space, follow these instructions of you need help doing this. First you will need to ensure all layered line up correctly, they should, however if they don’t? Click on the padlock on the corner of the file to adjust.

Once you are happy, colour all the layers, use the pictures on the page as a guide, I have also labeled each layer.

• 1 White, heart cut out
• 2 Red, layer with the solid square
• 3 Blue, Layer with the open centre
• 4 White, Solid heart

Cutting Your Jubilee Heart SVG On Cricut

When you send your Union Jack Heart SVG/PNG files to your Cricut to cut, ensure you use your brayer to roll the paper, vinyl or card to adhere to the mat. Movement will affect the cut. 

Line up all the layers in design space, to confirm all files line up correctly and exactly the same size. Remember you are using 3 colours over 4 layers, so have the card stock ready to hand and really think about the colours.

How To Build Your Union Jack SVG Heart Layered File

Start by attaching the blue layer to the back white layer first, do this with sticky pads, I use a selection of sizes depending on the size of the back of the file.

Keep working till all layers are attached. I used glue for the top layer.

Also Check Out My Chopping Board I Engraved With Glowforge

I created this by uploading the heart and grown, both in the pack and using the en grave setting.

How To Get Your Union Jack SVG/PNG Files

Click here or the image below to get your free downloadable Union Jack SVG/png files and follow these instructions to add to Cricut Design Space. Don’t forget to turn off any pop up blockers. Note if you are using Glowforge you need SVG files to cut the image out of wood or acrylic. Or Png or SVG to engrave.

If You’re Having Problems?

Check out my trouble shooting page, hopefully it will answer any questions you may have.

Tips And Advice For Using Your Download For Cricut

• Cricut Design Space Guide
• How To Slice And Weld In Cricut Design Space
• How to upload to Cricut Design Space
• Using Iron On Vinyl
• Where Else To Get Free SVG Files

Also please do pop over to Instagram, and give me a follow and if you make a project tag me! I love seeing everyone else’s makes and chatting crafting. I could do that all day!