It’s nearly Trick or Treat season whoohooo, and today I am sharing my Free Layered Trick Or Treat SVG for Halloween crafts and diy decorations with Cricut, Glow Forge and Silhouette . It’s such an exciting time of year! We don’t live in a place where trick or treaters venture to, I so wish we did, I just love seeing everybody else’s experiences on social media.
In fact I would just love to experience Trick or Treat season in the USA, probably Disney if I could choose, I just can’t imagine how magical it is for you guys? Thus for now I can get my Halloween crafts and files for everyone else to enjoy. Also if you have kiddies check out the colouring version over on ABC Colouring.
This post may contain affiliate links. Which means I may receive a small commission if you click a link and purchase something that I have recommended at no extra cost to yourself. As an amazon, Cricut and Glowforge associate, I earn from qualifying purchases.
What You Will Find Here
What You Will Need For My Free Trick Or Treat SVG
- Cricut Maker,
- Weeding Tools
- Card Stock black, white, teal, cerise and orange glitter.
- Glue, I use Cosmic Shimmer Acrylic Glue
- Nuvo Drops in Morning Dew, I also used Nuvo Jewel Drops in Sea Breeze to finish off.
Making Your Trick Or Treat SVG/PNG On Cricut
Upload your Trick Or Treat SVG files to Cricut Design Space, follow these instructions if you need help doing this. Firstly you will need to ensure all layers line up correctly, they should, however if they don’t, click on the padlock on the top bar of the Trick Or Treat files to adjust.
Once you are happy, colour all the layers of your sun using the pictures on this page as a guide. Note on some of my pictures I only used 4 layers as I couldn’t decide on black or orange for the top layer, but think I prefer the top layer being black. The Colours I used are….
- 1. Black for the top layer
- 2. Orange Glitter for the second layer
- 3. White for layer 3
- 4. Teal for layer 4
- 5. Cerise for layer 5.
Cutting Your Layered Trick Or Treat SVG On Cricut
How To Build Your Trick Or Treat SVG Layered File
Firstly start by making sure they all line up and every layer is the correct way round, then flip all of the layers over.
Next, turn the back cerise layer over and apply glue dots to the back of the teal layer 2, now stick it to the back layer. Repeat this with the white, then orange and lastly black layer ensuring the files are all lines up.
When this is done use Morning Dew Nuvo Drops to decorate the “OR”, then choose either a cerise or aqua colour and decorate the corresponding letters. I chose to use Sea Breeze and decorate the teal letters to give the letters a little contrast.
How To Get Your Free Trick Or Treat SVG/PNG Files
Click here of the the image below to get your free downloadable Trick Or Treat SVG/png files and follow these instructions to add to Cricut Design Space. Don’t forget to turn off any pop up blockers. Note if you are using Glowforge you need SVG files to cut the image out of wood or acrylic. Or Png or SVG to engrave.
If You’re Having Problems?
Check out my trouble shooting page, hopefully it will answer any questions you may have.
Tips And Advice For Using Your Download For Cricut
- Cricut Design Space Guide
- How To Slice And Weld In Cricut Design Space
- How to upload to Cricut Design Space
- Using Iron On Vinyl
- Where Else To Get Free SVG Files