This free Thank You SVG file is perfect for creating thank you cards and scrapbooking layers. Made of chunky letters but with delicate floral details this makes its the prettiest file, perfect for saying thank you.
There’s nothing better than getting a thank you card is there? Just knowing that somebody appreciated you or what you are doing can really make your day. Anyhow I digress, scroll down to get your free SVG file, I have also included a tutorial taking you through creating and contouring layers.
This post may contain affiliate links. Which means I may receive a small commission if you click a link and purchase something that I have recommended at no extra cost to yourself. As an amazon, Cricut and Glowforge associate, I earn from qualifying purchases.
What You Will Need For My Free Thank You SVG
- Cricut Maker,
- Weeding Tools
- Glitter Card Stock in 3 Colours, I used 3 shade of pink.
- Glue, I use Cosmic Shimmer Acrylic Glue
Making Your Thank You SVG/PNG On Cricut
Upload your Thank You SVG to Cricut Design Space, follow these instructions if you need help doing this. If you want to create a layered file it’s simple if you follow these instructions.
Start by duplicating your Thank You SVG, once duplicated click on one of the layers and click the contour tool, you will find this in the bottom right hand corner of Cricut Design Space.
Now choose which contours to remove, this is personal choice, however I removed the centre of all of the flowers.
Next duplicate the Thank You layer you have just contoured and click contour. You now have 2 choices, you can remove contours for another layer. Or remove all contours and create the back layer.
You will need to ensure all layers line up correctly, they should, however if they don’t, click on the padlock on the corner of the file to adjust. Once you are happy, colour all the layers.
Cutting Your Thank You SVG On Cricut
Next, line up all the Thank You SVG layers in design space to confirm all files line up correctly and are exactly the same size. However, do remember you are using 3 different colour layers, so have the card stock ready to hand and really think about the colours.
How To Build Your Thank SVG Layered File
Firstly start by making sure they all line up and every layer is the correct way round, then flip all of the layers over.
Next, add a thin layer of glue, (I use cosmic shimmer acrylic glue) to the back of your middle layer and attach it to the back layer, followed by the top glittery layer. I find the cosmic shimmer glue sets really well, but it does give you a second or two to allow you to adjust and slide before setting. However you only need a tiny bit to avoid it leaking.
How To Get Your Free Thank You SVG/PNG Files
Click here of the the image below to get your free downloadable Thank You SVG/png files and follow these instructions to add to Cricut Design Space. Don’t forget to turn off any pop up blockers, and if your email doesn’t come through check your spam folder. If you are already a subscriber check the members area on the members page under summer crafts and the files are ready for you there. Note if you are using Glowforge you need SVG files to cut the image out of wood or acrylic. Or Png or SVG to engrave.
If You’re Having Problems?
Check out my trouble shooting page, hopefully it will answer any questions you may have.
Tips And Advice For Using Your Download For Cricut
- Cricut Design Space Guide
- How To Slice And Weld In Cricut Design Space
- How to upload to Cricut Design Space
- Using Iron On Vinyl
- Where Else To Get Free SVG Files