Free Pride Rainbow SVG For Cricut & Glowforge

Its nearly pride month and this year my pride celebration project is the super cute layered pride rainbow SVG. Which is also scattered with hearts instead of clouds to share a little happiness and love.

Not only that, you don’t have to make this project as a layered project. You can also use the top layer independently, thus I have labeled this the white layer. It’s also perfect to use with iron on vinyl, and wood and acrylic on Glowforge.

This post may contain affiliate links. Which means I may receive a small commission if you click a link and purchase something that I have recommended at no extra cost to yourself. As an amazon, Cricut and Glowforge associate, I earn from qualifying purchases.

Project Ideas For My Layered Pride Rainbow SVG/PNG

• Pride Cards
• Pride Cake Toppers
• Wooden Art With Glowforge
• Use Pegs And String For Hanging Pride Banners
• Iron On Vinyl Hoops
• Scrapbooking Pages

What You Will Need For My Layered Pride Rainbow SVG

• Cricut Maker, to cut out of Cardstock or Glitter Card
• Weeding Tools 
• Brayer
• White Glitter Card Stock
• Red Card Stock
• Orange Card
• Yellow Card
• Green Card Stock
• Blue Card
• Purple Card
• Glue, I use Cosmic Shimmer Acrylic Glue

Making Your Layered Pride Rainbow SVG/PNG On Cricut

Upload your pride rainbow files to Cricut Design Space, follow these instructions of you need help doing this. Firstly you will need to ensure all layers line up correctly, they should, however if they don’t, click on the padlock on the corner of the file to adjust.

Once you are happy, colour all the layers, using the pictures on this page as a guide. I have also labeled each layer, thus corresponding with the colours of the pride flag.

• 1. White glitter
• 2. Red
• 3. Orange
• 4. Yellow
• 5. Green
• 6, Blue
• 7. Purple

Cutting Your Pride Rainbow SVG On Cricut

When you send your Rainbow Hearts SVG/PNG files to your Cricut to cut, ensure you use your brayer to roll the paper, vinyl or card to adhere to the mat. Note that movement will affect the cut. 

Next, line up all the rainbow svg layers in design space to confirm all files line up correctly and are exactly the same size. However, do remember you are using 7 different colour layers, so have the card stock ready to hand and really think about the colours.

How To Build Your Pride Rainbow SVG Layered File

Firstly start by making sure they all line up and every layer is the correct way round, then flip all of the layers over.

Next, add a thin layer of glue, (I use cosmic shimmer acrylic glue) to the back of your blue layer and attach it to the purple layer, followed by green, yellow, orange, red then lastly the white glittery layer. I find the cosmic shimmer glue sets really well, but it does give you a second or two to allow you to adjust and slide before setting. However you only need a tiny bit to avoid it leaking.

How To Get Your Pride Rainbow SVG/PNG Files

Click here of the the image below to get your free downloadable Pride Rainbow SVG/png files and follow these instructions to add to Cricut Design Space. Don’t forget to turn off any pop up blockers. Note if you are using Glowforge you need SVG files to cut the image out of wood or acrylic. Or Png or SVG to engrave.

If You’re Having Problems?

Check out my trouble shooting page, hopefully it will answer any questions you may have.

Tips And Advice For Using Your Download For Cricut

• Cricut Design Space Guide
• How To Slice And Weld In Cricut Design Space
• How to upload to Cricut Design Space
• Using Iron On Vinyl
• Where Else To Get Free SVG Files

Also please do pop over to Instagram, or Tik Tok and give me a follow and if you make a project tag me! I love seeing everyone else’s makes and chatting crafting. I could do that all day.