Can you believe we are on the door step or autumn/fall? I know we are mid heatwave, however, I am firmly in autumn planning mode. Thus my Free Layered Fall SVG For Cricut And Glowforge is perfect for seasonal projects, framed art, vinyl projects and scrapbooking layouts.
Additionally although this file is a layered file, it can also be used as a single layer the choice is yours to be as creative as you want.
This post may contain affiliate links. Which means I may receive a small commission if you click a link and purchase something that I have recommended at no extra cost to yourself. As an amazon, Cricut and Glowforge associate, I earn from qualifying purchases.
What You Will Need For My Free Fall SVG
- Cricut Maker,
- Weeding Tools
- Card Stock, Green glitter, red, brown and orange.
- Glue, I use Cosmic Shimmer Acrylic Glue
- Nuvodrop crystal morning dew drops
Making Your Fall SVG/PNG On Cricut
Upload your Fall SVG files to Cricut Design Space, follow these instructions if you need help doing this. Firstly you will need to ensure all layers line up correctly, they should, however if they don’t, click on the padlock on the corner of your fall files to adjust.
Once you are happy, colour all the layers of your sun using the pictures on this page as a guide. The Colours I used are….
- 1. Green glitter for the top layer.
- 2. Red for the second layer.
- 3. Brown for layer 3.
- 4. Orange for the back layer.
Cutting Your Fall SVG On Cricut
How To Build Your Fall SVG Layered File
Firstly start by making sure they all line up and every layer is the correct way round, then flip all of the layers over.
Next, turn back orange layer over, apply glue dots to the back of the brown layer and position on top of the orange layer so it all lines up. Now repeat with the red and then green layers until your file is built.
Finish off by adding dots with Nuvo Drops Crystal drops to add a raindrop dew effect to the letters.
How To Get Your Free Fall SVG/PNG Files
Click here of the the image below to get your free downloadable Fall SVG/png files and follow these instructions to add to Cricut Design Space. Don’t forget to turn off any pop up blockers. Note if you are using Glowforge you need SVG files to cut the image out of wood or acrylic. Or Png or SVG to engrave.
If You’re Having Problems?
Check out my trouble shooting page, hopefully it will answer any questions you may have.