Today I am sharing out free layered Cute Spider SVG For Halloween crafting and scrapbooking, and I have to say with those big goggly eyes its a cute one.
I can’t believe that I am in Halloween season, but it is one I start early as Halloween is one of my favourite seasons. There’s something so exciting about autumn/fall. I think its the frosty weather, crunchy leaves and promise of Christmas that makes this such a magical season.
This post may contain affiliate links. Which means I may receive a small commission if you click a link and purchase something that I have recommended at no extra cost to yourself. As an amazon, Cricut and Glowforge associate, I earn from qualifying purchases.
What You Will Need For My Free Cute Spider SVG
- Cricut Maker,
- Weeding Tools
- Card Stock, I used black glitter card stock for the back layer, eyes and mouth and plain black for the front layer, with teal in the middle and white for the eyes.
- Glue, I use Cosmic Shimmer Acrylic Glue
- Sticky Pads
Making Your Spider SVG/PNG For Halloween On Cricut
Upload your Spider SVG files to Cricut Design Space, follow these instructions if you need help doing this. Firstly you will need to ensure all layers line up correctly, they should, however if they don’t, click on the padlock on the corner of the spider files to adjust.
Once you are happy, colour all the layers of your spider using the pictures on this page as a guide. The Colours I used are….
- 1. Black mat card for the top layer.
- 2. Teal for the second layer.
- 3. Black glitter card for the back
- 4. White for the eyes.
Cutting Your Spider SVG On Cricut
When you send your Spider SVG/PNG files to your Cricut to cut, ensure you use your brayer to roll the paper, vinyl or card to adhere to the mat. Note that movement will affect the cut.
How To Build Your Spider SVG Layered File
Firstly start by making sure they all line up and every layer is the correct way round, then flip all of the spider layers over.
Next, turn the back glittery layer over and add glue to the back of the teal layer. Flip this over and attach to glittery black layer. Now glue the back on the top matt black layer and add to the top.
Lastly, construct your spider eyes by gluing the front glittery layer to the whites, before sticking sticky pads to the back of the eyes and mouth and positioning on your spider.
How To Get Your Free Spider SVG/PNG Files
Click here of the the image below to get your free downloadable Back To School SVG/png files and follow these instructions to add to Cricut Design Space. Don’t forget to turn off any pop up blockers. Note if you are using Glowforge you need SVG files to cut the image out of wood or acrylic. Or Png or SVG to engrave.
If You’re Having Problems?
Check out my trouble shooting page, hopefully it will answer any questions you may have.
Tips And Advice For Using Your Download For Cricut
- Cricut Design Space Guide
- How To Slice And Weld In Cricut Design Space
- How to upload to Cricut Design Space
- Using Iron On Vinyl
- Where Else To Get Free SVG Files
Also please do pop over to Instagram, or Tik Tok and give me a follow and if you make a project tag me! I love seeing everyone else’s makes and chatting crafting. I could do that all day.